why-is-my-vape-not-working

Troubleshooting: Why Your Vape Isn't Working Properly

Written by: cbd relx

|

|

Time to read 6 min

Introduction

Say you noticed the wicks of your vaping device are clogged, or its batteries aren’t working the way they should. If you encounter these, don’t dispose of your device, run to a store, and buy a new one just yet. At times, it’s all about troubleshooting the issue. 


The massively growing popularity of vaping in the UK, as evidenced by the estimated 4.3 million people vaping regularly according to media reports, has led to a greater number of individuals joining this trend. With this, how often they vape may also increase in frequency. Though this isn’t bad at all, of course, it’s also normal to get frustrated if your device fails to function properly.


In this valuable discussion, we’ll talk about the most common technical issues with your vape and how you can troubleshoot them in the most effective manner. You’ll also get to know devices that won’t give you stress while you use them – such as our Artisan, Essential, and Infinity 2 devices – known for their top-notch designs and performance. Let’s dive right in.



Why Is My Vape Not Working?

A good question to raise. First and foremost, there are common issues that can hinder the proper functioning of your device, including:


 

Faulty or drained batteries: The battery is the energy source of your vaping device, the same way fuel is for a car.  

  

Inadequate e-liquid: Check if the vape tank is already empty.  

  

Issues with connection: Usually, these are about atomisers and batteries not being properly connected. 

 

Is your vape not firing? Aside from the common issues above, there are other reasons why this occurs, such as: 


 

Defective coil: The coil is an essential part of your vaping device. It won’t fire properly if the coils are defective or perhaps burnt out.  

  

Incorrect assembly: If you aren’t sure how to assemble the device properly, it’s alright to ask assistance from someone more knowledgeable.  

 


  • Unfinished charging: Just like with mobile phones, there’s no way you can use a vape well if it isn’t charged fully. 


Why Is My Vape Not Working?

Troubleshooting: How to Resolve Vape Technical Problems

Battery Issues

There are times when the culprit is the battery. Here’s how to troubleshoot this incident:

  • Check if your battery is flat. Meaning to say, it doesn’t have adequate power to run the vape device. The next step is simply to charge your battery. 
  • Sometimes, you’ll notice some dirt in the connection linking your battery and tank. Don’t let the dirt stop your vape from working properly. Remove the battery for a while, clean the connection and your battery’s top part using a cotton hub. Once done, re-insert the battery, and see if your vape is back on track.
  • If the issue is with charging, recharge the battery and wait until it’s fully charged before using it with your vape. Also, don’t attempt to overcharge. 
  • Or, you might need to buy a new battery altogether.

E-Liquid Blockages

The most common sign that’ll tell you there’s a disruption in the e-liquid flow is a dry hit. This happens usually due to clogged wicks or tanks. Just like how clogged drains need a plumber, you need the right solutions, but you won’t need somebody else as you can solve e-liquid blockages yourself.


Start by gently breathing in or blowing out through the device’s mouthpiece. This will allow you to melt the oil that might be causing the clogging. Then, grab a hair dryer and use it to heat the clogged oil for half a minute. By this time, it’ll be easier to clog out your cart. Apply alcohol to a cotton swab and clean off the buildup of oil around your cart’s air holes. 


Sometimes, you won’t find any sign of clogging, but your vape device still functions awfully. Check if it’s the right e-liquid you’re using and if it’s compatible with your device.

Coil Issues

Together with the atomiser, your vape’s coil is the wizard that casts magic to turn that flavourful e-liquid into the vapour you’re craving. But, if that wizard is ill, for sure, no magic can happen.


Can it be due to the coil being worn out or loose? Loose coils are like loose guitar strings. Loose strings, no good music. Loose coils, no good vapour. 


Therefore, ensure your coil is installed properly, screwed in and snugly positioned. You must also check if the electrical connection and the resistance are right. You don’t want a mismatched coil here.  


Also, if you’ve changed to a brand-new coil, you must first prime it. Proper priming is dropping a tiny bit of e-liquid on each of your coil’s cotton window, then allowing it to sit for about 10 minutes before using the vape.

Overheating Problems

Like a car overheating, a vape device overheating is one of the last things you want to encounter. Of course, your device will overheat if it’s left under scorching temperatures. It will also overheat if you’re doing the mouth-to-lung technique with a device meant for direct-to-lung vaping. 


To prevent the overheating of your device, regularly cleaning it and inspecting its battery are among the most proximate troubleshooting steps. You’ll also want to invest in high-quality coils, batteries, and other parts.

Device Settings

Your vape device’s settings are the angels that will protect you from unsafe vaping, making sure you get just the satisfaction you deserve. Yet if those settings are not right–such as incorrect temperature or wattage adjustments, you’re compromising the performance of the device.


Your best bet is to refer to the manual again, even if you’ve already been vaping for a long time. There are also devices like our Infinity 2 that allow you to set a particular mode depending on the experience you’re aiming for.

Improper Assembly After Cleaning

Just as how an unkempt home discourages your visitors from staying, not regularly cleaning your vape device brings in distasteful flavour and vapour, bad performance, and a damaged device. Reassembling the device correctly after cleaning it will prevent connection problems and tendencies for it to malfunction. This leads us to the next section.

How to Maintain Optimal Vape Performance

Follow these essential tips to keep your vape device performing at its peak.


E-liquids: When not in use, keep them sealed inside a locked storage area at the appropriate temperature and away from direct sunlight. You should also keep them in their original bottles or they won’t taste right. 

  

Tank: Check its seals and clear the airways. When not in use, keep it in an upright position with the airflow closed to shield it from dirt. 

  

Battery: Seeing a damaged battery wrap? Invest in a replacement wrap, otherwise, you’ll need to purchase a new battery to avoid any mishaps. Then, practice proper charging. 

  

Vape device: For the device overall, clear the connection and do regular cleaning. These will keep it in tip-top shape.   

 

Best Vapes for Ideal Performance

Our brand, RELX, stands out in today’s market not only for our promising catalogue of vapes, but also for our substantial knowledge base, amazing customer support, and wide range of perks, among others. 


Three of our innovative devices are:

RELX Infinity 2 Vape Device


RELX Infinity 2 Vape Device

Choose how you want to vape with its three-level power, accessible in one simple click: Eco mode for lighter puffs, Smooth mode for that familiar taste, and Boost mode for relentless vaping.

RELX Artisan Device

This device carries with it true craftsmanship reflected upon its sophisticated metallic surfaces and sleek defined lines. Vape in style.

RELX Essential Device

Living up to its name, this champions what you need for the best vaping experience, from its leak-resistant features to its super smooth performance.


Conclusion

Is your vape not working properly? This discussion has processed all the hefty information you can find to provide you with a concise guide to the most common issues and how to troubleshoot them effectively. Be sure to apply the tips to guarantee only satisfaction with your vaping. 


Embark on your vaping journey with confidence. Head to our website to see our catalogue and offered perks. We invite you to redeem the NEW40 promo code for a 40 percent discount for first-time buyers. Shop now!

Notice! We have found that you have already participated in Referral activities, and repeated participation in the activities will not be rewarded
Got it (5s)
Shopping Cart
 
Coupons available now,Check out to Use

Total

£0.00
Your cart is empty!
Continue Shopping
RelxNow PWA
Add shortcuts for a smooth experience. Once you log in from the shortcut, you'll get a free pack of pod.

Step 1
Click the “Add Home Screen” menu.
Step 2
Click the “Add to Home Screen” from the menu list.
Step 3
Click the button of “Add”.
Step 4
After the installation is complete, you will see this icon on your desktop.
RelxNow PWA
Download

Add shortcuts for a smooth experience. Once you log in from the shortcut, you'll get a free pack of pod.
RelxNow PWA
Didn't work? Click here 👉

A free pod coupon will be sent to your Coupon list after you log in
Tips
If your Chrome cannot add RELX shortcut, please follow the steps below to set up and try again.
Step 1: Open the system settings, find Chrome browser in the application settings list;
Step 4: Refresh the page and re-add.
* If still unsuccessful, please use your system browser to open and try again.
OK, Got it